Batten Seam
Cladding
Batten seam cladding is a timeless yet contemporary option, offering a unique and visually striking look with its exposed vertical battens.
Characteristics
Providing a very traditional look with a very long history. Each tray is formed with two upstands against a timber batten. These timber battens are then capped off to ensure a waterproof finish.
The battens provide a stark and bold finish.
Applications
Originally designed as a roofing system, batten seam cladding is also suitable for vertical walls.
The battens are approximately 40mm high and 60mm wide, providing both structural integrity and aesthetic appeal.
Batten Seam Cladding
Batten seam cladding is a tough, weather-resistant, and aesthetically please building exterior.
Its noticable vertical battens offer superior protection against the elements, while its distinctive design adds a unique, modern look and a natural twist.
It is suitable for a wide range of architectural styles and applications, including both roofs and walls, due to the versatility of batten seam cladding.
Batten Seam Cladding – Criteria and Measurements
System Buildup
The Batten seam system requires a fully supported build up for both walls and roof applications.
It is advised that this plywood sub-construction is installed over battens that allow for a ventilated system. Some material manufacturers make this a requirement to qualify for the material warranty offered.
Wall applications: it is recommended that a minimum 15mm thick layer of structural plywood is being used.
Roof applications: a minimum 17mm thick layer of structural plywood is required.
This plywood is then covered with a breathable / waterproof membrane such as ProctorWrap RW (walls) and ProctorWrap HTR (roofs).
In some instances the use of a self-adhesive waterproof membrane is recommended such as the ProctorWrap SA.
Depending on the material being used, it is recommended to use a physical separation layer between the metal panels and the sub-construction. (Speak to us for further individual requirements.)
Standard Sizes
The standard sizes of the Batten Seam system are as follows:
- 200mm wide coils (Aluminium, Colorbond, some Copper)
- 300mm
- 330mm
- 500mm (not recommended as it shows a lot of oil canning)
- 1,000mm wide coils (VM Zinc, EL Zinc, Rheinzink, Copper)
- 233mm
- 400mm
- 670mm wide coils (VM Zinc, Rheinzink)
- 570mm -> This has been used on roofing applications predominantly. It is not widely used anymore these days as the materials can show excessive distortion in the panels.
While the above are the standard sizes meaning that there is no waste from the coil material, it is very common to customize the panel sizes to suit each project.
The width and length of the panels can easily be changed to better fit the project.
At AMC, we believe transforming your property goes beyond surface beauty. Maybe you’re looking to transform your clients’ space by combining modern cladding with traditional architecture. Or, you may want innovative insulation to help lower your energy bills and reduce your carbon footprint.
With combined industry experience of more than 40 years in the architectural roof and facade cladding world, AMC has the product and installation expertise to bring your vision to life and deliver a space that’s equal parts functional and aesthetic.
To learn more about our services please contact a member of our team on 0497 009 390.
You Bring the Challenge, We Bring the Solution.
Batten Seam Cladding Projects
0497 009 390
Contact Us
PO Box 712, Oakleigh VIC 3166
ABN: 31 613 751 938
Office Hours
Monday – Friday : 9am – 5pm
Website Design by The Website Queen | Digital Marketing by Web Marketing Angels | © 2008-2024